PIE 531 4-20 mA Loop Calibrator, Great Condition, 9 MSRP

Description

PIE 531 4-20 mA Loop Calibrator
The Practical Instrument Electronics (PIE) Model 531 is designed to be a tool with all the practical functions required to get the job done easily without the confusing extras or reading through a complicated manual. The Model 531 can source and read current in the process loop and simulates, power and measure 2-wire transmitters. The PIE 531 fits in your pocket or you can clip it on your belt.
Use the EZ-Check™ switch to quickly switch between a set value, 4mA, and 20mA outputs. In read mode, the EZ-Check™ switch recalls minimum and maximum readings. Clear minimum and maximum memory values with a press of the EZ-Dial™ knob. There are two speeds for dialing in ranges. When you press down on the EZ-Dial™ it will select a faster dialing speed.
·
True +/- 0.05% of reading accuracy
·
Source and read 0.00 - 24.00mA
·
Simulate 2-wire transmitters 0.00 - 24.00mA
·
Power 2-wire transmitters and read 0.00 - 24.00mA
·
Display current in mA or -25.00 - 125.00% of 4-20mA
·
Full 4 digit display
·
Drive 1200Ω
·
User selectable 250Ω resistor in series with the output for compatibility with HART® protocol enabled devices
·
EZ-Dial™ knob easily adjust output by 0.01mA (0.01%) or 0.10mA (1.00%).
·
EZ-Check™ switch
·
User settable EZ-Check™ for 0% and 100% span adjustments
·
Uses 2 AA alkaline batteries.
·
Superior battery life of 45 hours under typical continuous usage
·
Easy access to battery compartment
·
Lightweight, Rugged and Reliable
·
Small, tough and protected to 60V
**Multiple Units Available (If you need more than 1 unit. We have 10+ Units Available)**
**Like New Condition**