Fluke Corp. Beta MasterCal 990 Process Calibrator with HART (Equals 753 / 754)

Description

Item: Fluke Corportaion / Beta MasterCal 990 Process Calibrator with HART Communications (Replacement Equal to Fluke 753/754). Made in USA.
Accessories Included:
1 ea. Set of Electrical Leads
1 ea. Beta Carry Case w/ Extended Clip on Carry Strap
1 ea. New 7.2V Rechargeable Battery
*Charger / Battery Elimator not included
Manufacturer Specifications:
Precision multi-function calibrator and HART configurator/communicator in one hand-held instrument
Measure/read thermocouple, RTD, Ohms, DC and AC Voltage, DC current, pressure, and frequency
Source/simulate thermocouple, RTD, Ohms, DC Voltage and current, pressure, and frequency
Simultaneous input and output split-screen displays
Loop power function
Switch testing functions
Transmitter mode
Automated and user-programmable procedures
Engineering units, percent of scale, squarelaw
inputs, or custom units
Multi-lingual interface – English, French, German, Italian, and Spanish
200x240 pixel, bright white, backlit LCD display
Rugged over-molded urethane case for field use
Calibration automation and documentation with many popular third-party software packages
Complies with CAN/CSA C22.2 No 1010.1-92, ANSI/ISA S82.01-1994, UL3111, and EN610-1:1993
Product Description / Features:
The Beta MasterCAL 990 is a precision, multi-function, documenting calibrator that will calibrate virtually any process instrument you have – thermocouples, RTDs, Ohms, Voltage, current, pressure, and frequency. The MasterCAL 990 calibrator offers a host of convenience features including source ramp functions, loop power, variable density data logging with a week's worth of calibration results storage, compatibility with many third-party calibration documentation software programs, and a built-in HART configuration / communicator. These features make the MasterCAL 990 multi-function calibrator an indispensable tool.
The Beta MasterCAL 990 calibrator's large, white backlit LCD provides simultaneous display of input and output. Menu-driven, "soft" function keys provide rapid setup and measurement. The multilingual interface ensures the MasterCAL 990 is useful in as broad a range of applications and locations as possible. A high capacity rechargeable battery pack provides extended usage of this multi-function calibrator. An optional battery eliminator is available for extended monitoring applications. The MasterCAL 990 is housed in an over-molded urethane case that provides a solid grip and protection against "hard knocks".
Source/Simulation and Measurement/Read
The MasterCAL 990 multi-function calibrator will source/simulate thermocouple, RTD, Ohms, DC Voltage and current, and frequency. Auto-step and ramp functions are provided on all outputs and ranges.
Calibrators from the Beta MasterCAL 990 Series will measure/read thermocouple, RTD, Ohms, DC and AC Voltage, DC current, pressure, and frequency. Measuring pressure requires the use of the Beta Pressure Module Adapter (Model BPPA100) with any of Beta's Pressure Modules (please refer to the separate Pressure Module data sheet for ranges and accuracies).
Using a split-screen display mode, the MasterCAL 990 calibrator will simultaneously measure and source various process variables. These variables depend on whether loop power is enabled or disabled.
Switch Test Mode and Transmitter Mode
Process limit switches can be tested for both upper and lower trip limits and deadband. Using a split-screen measure / source mode, the MasterCAL 990 calibrator accepts a normal process variable measurement associated with the limit switch and the switch contacts. The MasterCAL 990 will automatically monitor and record the measurement as the switch is activated and then deactivated. A graphical plot of deadband is displayed, making switch test quick and accurate.
The MasterCAL 990 multi-function calibrator can be inserted in a 4-20 mA process loop to simulate a 2-wire transmitter. The calibrator provides the loop excitation and modulates the loop current, simulating the 2-wire transmitter.
Built-In Calculator Functions
The MasterCAL 990 features a built-in calculator with square-root function. Accessible registers contain measure values and source values.
Barcode Entry Option
Multi-function calibrators from the MasterCAL 990 Series will accept input from an optional barcode wand for rapid entry of instrument serial numbers.
HART Implementation
The Beta MasterCAL 990 supports HART Version 5.7 protocol instructions. Its functions are comparable to a HART 275 Communicator; because the MasterCAL 990 does not have a DD interpreter, it does not support DD libraries. Most instrument maintenance functions can be accomplished using just the MasterCAL 990 without the need for a separate HART communicator. Hookup is simple with the supplied HART interface cable. The calibrator menus automatically branch to appropriate adjustment choices. Automatic completion of test templates and automatic fetching and sending of analog readings during trim operations make HART calibration a highly efficient operation.
Protocol Instructions
The MasterCAL 990 instruction set includes three levels of commands.
Universal Commands provides functions for all field instruments to read manufacturer and device type, primary variable/input signal (PV), read output, tag ID, etc.
Common Practice Commands provides functions that are common to most field instruments, such as reading multiple variables, setting damping features, etc.
Device-Specific Commands allows the MasterCAL 990 to perform device-specific configuration functions for a wide variety of popular field instruments.
Operating Modes
The MasterCAL 990 universal documenting calibrator supports HART Point-to-Point Operation, where a single HART instrument is connected in a loop; the calibrator is normally connected directly at the instrument's local signal terminals. The MasterCAL 990 is also compatible with multi-drop and burst mode HART installations.
Documenting Calibration
The MasterCAL 990 calibrator is compatible with many third-party calibration documentation software programs including:
Applied Systems Technologies Cal Station and Base Station
Emerson Process Management AMS
Prime Technologies ProCal
Fluke DPC Track
Honeywell DocuMint
Others supporting the ISA Field Calibrator Interface standard
Buyer / End user responsible for current calibrations as needed.
LISTING DISCLAIMER: ALL TOOLS SOLD "AS IS", WITHOUT ANY OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, WARRANTIES OF MERCHANTABLE QUALITY, SATISFACTORY QUALITY, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. THE TESTING, SAFETY AND PERFORMANCE OF THE PRODUCT IS ASSUMED BY THE END USER. WE SHALL NOT HAVE ANY LIABILITY TO THE END USER OR ANY OTHER PERSON OR ENTITY FOR ANY INDIRECT, INCIDENTAL, SPECIAL, OR CONSEQUENTIAL DAMAGES WHATSOEVER, INCLUDING, BUT NOT LIMITED TO, LOSS OF REVENUE OR PROFIT, INJURY OR OTHER COMMERCIAL OR ECONOMIC LOSS.