Fluke 726 Multifunction Process Calibrator ( Expedited Shipping ) / DHL 5-15 day

Description

Fluke 726 calibrator, one set of AC72 crocodile clips, one set of expandable test leads, one set of TL 75 test leads, user manuals.
Automated production line used in manufacturing, and other industries, can function at high efficiency only in ensuring accuracy and reliability of information from the sensors and transducers which, in fact, are the key elements of the AMS.
Therefore, when precision sensors are calibrated, it is imperative to use high-precision tools. The multifunctional process calibrator Fluke 726 has the highest accuracy among similar devices of its class, and at the same time it features high functionality and versatility,
so you can use it to calibrate almost any sensors and converters used in industrial automation systems.
Features of the Fluke 726 multifunction calibrator
Calibrator Fluke 726 allows you to perform all tasks solved with the help of the younger model Fluke 725, and besides this:
provides greater accuracy in measuring and simulating signals, which can be used to calibrate precision sensors;
allows you to determine the error of the sensors being checked (you do not need to perform additional calculations with the calculator);
can be used to calibrate frequency meters,
modeling the frequency sequence of pulses, without the use of a separate generator or a specialized calibrator;
It makes possible to check HART devices, thanks to the built-in resistor, which is connected to the measuring circuit if necessary;
saves up to 8 calibration results in memory,
which you can analyze in more detail after the end of the measurements;
checking thermal converters, can use user temperature dependencies and calibration constants in the course of extended measurements, which provides a higher flexibility for the application of this calibrator.
Fluke 726
Direct current voltage
30000 V 0.01% + 2 units (top of the display)
30000 V 0.01% + 2 units (lower part of the display)
100 mV 0.01% + 2 units
from -10 mV to 75 mV 0.025% + 1 unit (via the TC-connector)
D.C
24,000 mA 0.01% + 2 units
Resistance
from 0 to 4000 Ohm +/- 0.015%
Frequency
from 2.0 to 1000 CPM 0.05% + 0,
1 unit
from 1.0 to 1000 Hz 0.05% + 0.1 Hz
from 1 to 15.0 kHz 0.05% + 0.1 kHz
from 10 to 15.0 kHz 0.05% + 1 unit
Sensitivity A minimum of a double amplitude of 1 V
Pressure
Accuracy from 0.025% of the range when using any of the 29 pressure modules. (for detailed specifications,
pressure modules in additional equipment and accessories) There are modules for differential, gauge, absolute, double, high pressure and for vacuum.
Excitation accuracy
Direct current voltage
100 mV 0.01% + 2 units
10000 V 0.01% + 2 units
from -10 mV to 75 mV 0.025% + 1 unit (via the TC-connector)
D.C
24,
000 mA (source) 0.01% + 2 units
24,000 mA (imitation) 0.01% + 2 units
Resistance
Range from 5 to 400 Ohm
from 5 to 400 ohm
from 400 to 1500 ohms
from 1500 to 4000 Ohm
Accuracy Percentage of value + basic error
0.015% + 0.1 Ω
0.015% + 0.05 Ohm
0,015% + 0,5 Ohm
0,015% + 0,5 Ohm
Excitation current from 0.1 to 0.5 mA
from 0,5 to 3 mA
0.05 to 0
, 8 mA
from 0.05 to 0.4 mA
Frequency
from 2.0 to 1000 CPM 0.05%
from 1.0 to 1100 Hz 0.05%
from 1.00 to 10.00 kHz 0.25%
from 10 to 15.0 kHz 0.5%
Signal form: Straight line. a double amplitude pulse of 5 V, a deviation of -0.1 V
Pulse RTD transmitters and thermocouples
Measurement and excitation accuracy:
Cu10 1.8 ° C
NI-120 0.15 ° C
PT-100 (385) 0.25 ° C
PT-100 (392) 0,
15 ° C
PT-100 (391-JIS) 0.25 ° C
PT-200 (385) 0.75 ° C
PT-500 (385) 0.35 ° C
PT-1000 (385) 0.15 ° C
Solution: 0.01 ° C
J: 0.4 ° C
K: 0.5 ° C
T: 0.4 ° C
E: 0.4 ° C
R: 1.4 ° C
S: 1.4 ° C
B: 1.4 ° C
L: 0.45 ° C
U: 0.45 ° C
N: 0.6 ° C
XK: 0.4 ° C
BP: 1.1 ° C
Resolution J, K, T, E, L, N, U: 0,1 ° C, 0,1 ° F B, R, S: 1 ° C, 1 ° F
Features
Linear-increasing functions
Excitation functions: Voltage, current, resistance, frequency, temperature
Linear Change Functions The function of slow, fast (ramp) linear change, stepping function (25% step)
Network power function
Voltage: 24 V
Accuracy: 10%
Maximum current: 22 mA, short circuit protection
Step functions
Excitation functions: Voltage, current, resistance, frequency, temperature
Steps 25% of the range, 100% of the range
Environmental requirements
Operating temperature -10 ° C to + 55 ° C
Storage temperature from -20 ° C to + 71 ° C
Height above sea level during operation 3000 m
Electrical safety standard
The received approvals of EN 61010-1: 1993,
ANSI / ISA S82.01-1994; CAN / CSA C22.2 No 1010.1: 1992
Mechanical and general characteristics
Size 200 mm x 96 mm x 47 mm (7.9 in x 3.8 in x 1.9 in)
Weight 650 g (23 oz)
Batteries 4 AA alkaline batteries
Replacement of batteries Separate battery compartment for changing the battery without violating the calibration mark
Connections to the harbor port The pressure block connector, also used for remote programming in real time
Shipping
Expedited shipping DHL 5-15
days.
PAYMENT
We accept the following payment methods: PayPal and payment to a bank account for legal entities.
Returns...
·
If the condition of the item was sold is “As Is” then you can not exchange the item nor qualify for a refund. We are not responsible for ANY problems with item(s) sold “As Is” unless a wrong shipment was received.
·
We must be notified within 14 days from the date buyer has received item(s) (except “As Is” items) to qualify for any type of exchange/refund.
·
If item(s) is DOA, then we will refund 100% of the money you paid to win the auction, once the item(s) is returned back to us. Item(s) must be in the same condition as we have shipped out.
·
If it is NOT DOA, then we will refund 80% of the money you paid to win the auction, once the item(s) is returned back to us. We do charge a 20% of restocking fee. Item(s) must be in the same condition as we have shipped out.
·
Buyer must pay for all other shipping fees for any type of returns.
We do NOT accept returns for complaints from buyers regarding additional items that were not included in the auction description. For example, we will not accept complaints for not including the original box, manuals, or accessories
IF IT IS NOT STATED IN AUCTION
. If you are looking for those specific things when you purchase an item(s), please let us know before you make any purchase so we can work out those details. Thank you.