Fluke 702 Documenting Process Calibrator Used In Excellent Condition

Description

Fluke 702 Documenting Process Calibrator
The Fluke 702 Process Calibrator is an easy-to-use field calibrators designed specifically for use on control instrumentation in process plants. Rugged packaging allows the calibrator to perform dependably despite rough handling and hostile plant environments, while automatic documentation capabilities save time and ensure accurate results. Because the 702 is a multipurpose tool, you can use them for troubleshooting and maintenance as well as calibration.
Features
Calibrate temperature, pressure, voltage, current, resistance, and frequency
Simultaneously measure and source
Automatically capture calibration results
Document procedures and results to meet ISO 9000, EPA, FDA, OSHA and other requirements
Measure/simulate eleven types of thermocouples and eight RTDs
Store up to 8,000 readings in data logging mode
PC interface
Weight: 3 lb 1 oz
Internal Battery Pack: NiCd, 7.2V, 1700 mAh
Battery Life: Typically over eight hours
pecifications
Measure Range (full scale) 110.000 mVdc - 300.00Vdc; Vac, 20 Hz to 5 kHz; 30.00 mA dc - 110.00 mA dc; 11.000Ω - 11.000 kΩ; 1.00 Hz to 50.00 kHz
Source Range (full scale) 110.000 mV; 1.10000V; 11.00000V; Source 22.000 mA; Simulate 22.000 mA; 11.000Ω - 11.000 kΩ; 2.00 Hz to 50 kHz
Temperature, RTDs
and Thermocouples 10Ω Cu(427); 100Ω Pt(3916); 100Ω Pt(3926); 100Ω (385); 200Ω Pt(385); 500Ω Pt(385); 1000Ω Pt(385); 120Ω Ni(672); E, N, J, L, K, T, U, B, R, S, C
Data Log measure V, mA, ohms, frequency, temperature, pressure 1 to 60 readings/min, 8000 readings max
Ramp source V, mA, ohms, frequency, temperature 4 steps/sec
Loop Power selectable, 24V or 28V; 22 mA max
Fluke 702 Pressure Modules:
An optional set of external pressure modules provides pressure calibration and measurement capabilities. Ranges start at 0-10" water (0-2.5 kPa) and go to 0-10,000 psi (0-70,000 kPa).