DA 50-R DLA 56 DLE55 RC Gas Engine Bearings Sealed Hi Speed Premium ABEC3/C3

Description

Thanks for choosing RC Engine Bearings USA
Many thanks to our new and regular customers, we've been on Ebay over 20 years.
We do combined Shipping and send you a refund as soon as we do your orders.
If you don't see your Engine listed email me I have sets for most engines.
PLEASE CHECK FITMENT GUIDE BELOW
We only sell Premium Grade ABEC3 or better upgrade Bearings for only a couple dollars more than the abec1 or not tested low grade Bearings, our Bearings are correct C3 Clearance for Model Nitro/Gas Engines, we get our Bearings from proven reliable US Bearing Suppliers. Fast US Shipping from USA West.
(INFO) ALL INTERNATIONAL SHIPPING, we still pay the extra Ebay Shipping Fee we get charged plus Bubble Mailers, Packing Supplies, Print Ink & Paper and Misc. Plus our Insurance, so please bear with us we don't like the high cost of International Shipping any more than you, we do our best and have no other options except at much higher price shipping options. (Note) Int. Shipping can take 2 to 5 weeks due to multiple carriers sorting and Customs delays.
((NOTE INTERNATIONAL SHIPPING))), some Countries have Customs Fees that they can charge you when your order arrives, we don't know if or what they charge so check with your Postal Customs Service before buying if you don't know to avoid surprises.
(Printed BEARING Installation guide, Tips instructions)
I've rebuilt over 800 Model Engines if you need Help just send a message.
The listing is for
(2) NEW PREMIUM BEARINGS true sealed.
FITMENT BELOW
DA 50-R 50CC Gas Engine
DLA 56 56CC Gas Engine
DLE 55
55CC GasEngine
If you don't see your engine listed email me, I have sets for most engines.
(2) Crank  Bearings Premium ABEC3 C3 HC Chromium Deep Groove Full Metal Cage heavy duty hi speed True Sealed Bearings (open or 1 seal on request) Ships Sealed.
6002-
2RS ABEC3/C3 HS 15.00 x 32.00 x 9.00 mm
6003
-2RS ABEC3/C3
17.00 x 35.00 x 10.00 mm
Seals
Textured Rubber
Double Lip Seals
on each side of the bearing
Lubrication
Wide temperature range  (-40°F to + 350°F)
Noise Testing
Noise tested before and after lubrication
Noise Level
Passes V1 Noise Vibration Standards Smaller Sized, V2 Standards. Large Bore- Meets or exceeds Motor Requirements
Precision Balls
Matched ABMA Grade 10 or better for roundness
Raceways
Finely honed Super Finished for long life and low noise
Quality Level
Premium bearings meet or exceed ABEC 3 tolerances
Testing
Independent Endurance testing has verified our Premium bearings Outperformed all low cost bearings and matched or exceeded the performance of well-known brand name
bearings.
USA SELLER 20 Years US Shipping Fast, shipped from the US with Instructions and Tips in English to help with your rebuild.
Why Settle for Econo, no grade or Standard abec1 low grade bearings that are often rough, gritty even new and most likely won't stand the test of time.
We are a Top Rated Ebay Verified seller 20 years with fast Customer Service.
Engine BEARING Care and storage info.
Why pay or 40 dollars for low grade or no grade factory bulk bearings that don't last long compared to Premium Industrial Grade ABEC3/C3 High Speed Bearings, get some spares if you leave fuel in your engine they will need replaced after they gum up or turn into a ball of rust, you can save buying a new engine by replacing gummy or rusted, stuck, rough or loose bearings before they come apart and damage the piston, head and sleeve. Save $$$ New Premium ABEC3/C3 Bearings make a big difference in engine performance. I always remove the fuel line and idle the engine dry, then put in marvel mystery oil or after run oil and spin it over, for long tern add liberal amounts of After Run Oil and cap off carb and exhaust, if the engine sets for a long time Not properly oiled it may appear to turn smoothly but some of the time the bearings aren't even turning, then when started the crank spins in the inner bearing race, not good.