4-20mA/0-10V/mV Current Voltage Signal Generator Source Calibrator Signal Tester

Description

Descriptions:
The instrument can output/measure the following signals: current signal/voltage signal/mV signal; 8 kinds of thermocouple (E, K, B, S, T, R, J, N) signals; resistance signal; thermal resistance (Pt100, Cu50 ) signal, including 14 channels of input and 15 channels of output, which can be read by analog instruments on site or most of the quantities. V, mV, mA, Ω input and output all have corresponding buttons, which can be called directly without key combination, which is quick and easy to operate. Small instrument with rich functions
Features:
👍All functions use internal electronic switches. There are many other brands on the market. Unlike DIP switch auxiliary products, it is necessary to eliminate the influence of mechanical structure life and improve the use case.
👍With conventional signal input and output functions, as well as resistance, Pt100, Cu50 RTD, thermocouple input and output 8 kinds of signals, powerful
👍Two connector terminals, any level, regardless of input and output terminals Make full use of these two, never worry about the plug leads damaging the meter or equipment
👍V, mV, mA, Ω input and output have corresponding buttons, which can be called directly without menu selection in advance. Thermocouple, RTD input and output only have to enter the function of the corresponding mV or Ω file and then select it with the left arrow or right arrow. The operation is very simple. No need for key combination, easy to operate
👍Segment LCD clear display is the same as using a multimeter or calculator. The display area is large, the visible area is 49*29mm. Low power consumption, the maximum power consumption is less than 0.3mA. Less than 10mA when the backlight is turned on
Package Included:
1 calibrator
1 x Pair of Test Pens
1 x USB cable
1 suitcase
1 x User Manual 123