3 Premium RC Engine Bearing SETs SX50 OS FX46AX TT Pro 40/46 SAITO FA82 90 91

Description

Visit My eBay Store: RC Engine Bearings
Thanks for choosing RC Engine Bearings USA (cbr10006zu2)
Many thanks to our new and regular customers, we've been on Ebay over 20 years.
We do combined Shipping and send you a refund as soon as we do your orders.
If you don't see your Engine listed email me I have sets for most engines.
PLEASE CHECK FITMENT GUIDE BELOW
We only sell Quality Premium Grade ABEC3 or better upgrade Hi Speed Bearings and for only a couple dollars more than the common unknown spec or abec1 rated low grade general use Bearings, our Premium Bearings are all correct C3 Clearance for heat in Model Nitro/Gas Engines, we only sell True Sealed Bearings, Not the old leaky shield type. We get our Bearings from proven reliable US Bearing Suppliers. We have
BEARING SPECS Below Scroll down
Fast US Shipping from USA.
(3) SETS (6) PREMIUM BEARINGS ABEC3/C3
Engine Rebuild Printed tip sheet included.
(NOTE) These Bearings fit Many engines if you want email me I will send the complete list.
.
(INFO) ALL INTERNATIONAL SHIPPING Rates, we still pay the extra Ebay Shipping Fee we get charged plus Bubble Mailers, Packing Supplies, Print Ink & Paper and Misc. Plus our Insurance, so please bear with us we don't like the high cost of International Shipping any more than you, we do our best and have no other options except at much higher price shipping options. (Note) Int. Shipping can take 2 to 5 weeks due to multiple carriers sorting and Customs delays.
((NOTE INTERNATIONAL SHIPPING))), some Countries have Customs Fees that they can charge you when your order arrives, we don't know if or what they charge so check with your Postal Customs Service before buying if you don't know to avoid surprises.
(Printed BEARING Installation guide, Tips and 4 Stroke Timing instructions)
. Engine Rebuilders Special 3 SET DEAL (6 BEARINGS TOTAL) The listing is for (6) NEW PREMIUM Hi RPM BEARINGS True SEALED Fronts with installation Instructions . Rears are shipped open (no seals) please email if you want all sealed, Fronts are shipped with both seals, most remove one but always run a seal on the outside.
. In the past most engines just used a shielded low grade bulk front bearing, they leak, let dirt and moisture in, most new engines use these upgraded sealed type.
.I'm VeriSign, PayPal Verified . I've been on Ebay 20+ years with 100% Feedback, most of my items qualify for PayPal's Money Back Guarantee.
. Fitment guide for these Bearings
SAITO FG-14B 4 Stroke .82
OS ENGINES ABC-P RC  46
OS ENGINES AX 46  46
OS ENGINES AX 55  55
OS ENGINES FSR  50
OS ENGINES FSR  45
OS ENGINES FSR  40
OS ENGINES FSR ABC  45
OS ENGINES FSR RC W/MFLR  50
OS ENGINES FSR RC W/MFLR  40
OS ENGINES FSR-H RC  50
OS ENGINES FSR-S W/MFLR  40
OS ENGINES FSRH  45
OS ENGINES FX  46
OS ENGINES FX  40
OS ENGINES FX-H RING  46
OS ENGINES FXI  46
OS ENGINES H  40
OS ENGINES HZ  55
OS ENGINES SF  46
OS ENGINES SF  40
OS ENGINES SF ABC RC  40
OS ENGINES SF RC W/ MUFFLER  40
OS ENGINES SF RC W/MUFFLER  46
OS ENGINES SF RING  46
OS ENGINES SF RING  40
OS ENGINES SF-H RC  46
OS ENGINES SF-P  46
OS ENGINES SF-P RING  46
OS ENGINES SF-S ABC W/MFLR  46
OS ENGINES SF-S ABC W/MFLR  40
OS ENGINES SR 2C (OLD)  40
OS ENGINES SX  50
OS ENGINES SX-H  50
OS ENGINES SX-H RING HYPER  50
. ALIGN HELI 55H ALIGN HELI 50 HYPER (OS SX50 HYPER - Rebadged)
.THUNDER TIGER (TT) PRO 40/46 REDLINE 53 Heli Thunder Tiger RL 56 Redline Heli
.K&B FIRE 61 ENYA SS CX TV BB 45 50 2 strokes and Heli versions
.EVOLUTION 46 EVO 46NT 46NX 52NX and Heli versions
SAITO 130  Twin
SAITO FS-82
SAITO FA-90
SAITO FA-91
SAITO FA-91S  91
((.SAITO FA80
(NOTE OLD 80 USES Smaller Front)
(NOTE) old 120 and S use different bearings these don't fit those models
.
EMAIL ME BEFORE PAYING
))
.OS Hyper 50 Heli OS 50SX-H OS 55HZ OS FX-H 46 OS 46AX OS 40FX OS FXI 46 46FX OS 40SF OS 46SF OS 40FSR OS45FSR FSR50 OS 50SX OS 55AX
.ASP 46 A11
.Magnum XLS46 (Except XL)
.YS 45 50ST YS 56SR YS 50 Heli
. Royal 40/45 SIGNATURE 46
.BLUEBIRD 51 MDS 40
.
Bearing Type & Specs
This Premium RC Bearing Set replaces these original part # OS stock Bearings
OS FRONT EXCHANGE PART #
OS
26731002
OS REAR EXCHANGE PART #
OS
25830010
(REAR)  6902 Hi SPEED ABEC3/C3 PREMIUM
Deep Groove Bearings – EMQ Quality
Hi Carbon STEEL HCH EMQ
ISO Certificates
ISO 9001:2000
ISO 4001:2004
ISO/TS 16949 Germany
Dimensions
28 X 15 X 7 MM
BEARING GRADE
ABEC 3 Premium Grade
Internal Clearance Codes C3
EMQ Quality
RPM Limit
Grease 27000 rpm  *Sealed Pre-Loaded with Wide temperature range Chevron SI-2 (-20 to + 250)
Oil       31000 rpm  (OPEN)
Vibration Level V2+
(FRONT)   USBB R6 2-RS ABEC3/C3 Premium Blue Seal (Sealed)
Matched ABMA Grade 10 or better for roundness
Raceways    EMQ Quality
Finely honed Super Finished for long life and low noise
Quality Level EMQ ABEC3
Dimensions
Bore-3/8    OD-7/8    Width-.281
USBB Blue SEALS
to demonstrate to customers
these are our Premium Bearings (not just
a no grade or Low grade ABEC 1 bearing and someone says they are
Premium bearings).  Pay a little more to get a better product.
Mobile EM2 grease
and have Blue double lip seals
1 SEAL on each side of the Bearing.
Why Settle for Econo or Standard
abec1 low grade bearings or old leaky shield type that are often rough, gritty even new and most likely won't stand the test of time.
Thanks again to all our regular and new Customers for our 5 Star Seller Rating.
Engine BEARING Care and storage info.
Why pay or 40 dollars for low grade or no grade factory bulk bearings that don't last long compared to Premium Industrial Grade ABEC3/C3 High Speed Bearings, get some spares if you leave fuel in your engine they will need replaced after they gum up or turn into a ball of rust, you can save buying a new engine by replacing gummy or rusted, stuck, rough or loose bearings before they come apart and damage the piston, head and sleeve. Save $$$ New Premium ABEC3/C3 Bearings make a big difference in engine performance. I always remove the fuel line and idle the engine dry, then put in marvel mystery oil or after run oil and spin it over, for long tern add liberal amounts of After Run Oil and cap off carb and exhaust, if the engine sets for a long time Not properly oiled it may appear to turn smoothly but some of the time the bearings aren't even turning, then when started the crank spins in the inner bearing race, not good.